Editorial Contacts
Jim Austin - 715-323-3588
Managing Director, Targeted Content Inc.
Mike Schweiss - 507-426-8273
Owner, Schweiss Doors
Schweiss Doors presents the ultimate in a hidden door
RV owner sidesteps zoning restriction for unique motorhome garage
FAIRFAX, Minn., May 11, 2016 – Schweiss Doors provided a little imagination and a little innovation to help a Washington homeowner work his way around a zoning ordinance limiting garage doors to 8 feet in height.
Herb Korthuis of Lynden, Wash., owns a 12-1/2-foot-tall motorhome and wanted to keep it at his home. Unfortunately, any garage door bigger than 8 feet did not conform to uniformity code in the neighborhood. Korthuis, aware of the restrictions, discussed options with the developer, including installing a larger door disguised as a smaller door.
A vegetable farmer, Korthuis was visiting relatives who farm in Iowa and took a trip to the Iowa State Fair where he visited the Schweiss Doors display and demonstration booth.
“After seeing the Schweiss Doors I said ‘That’s exactly what I want for my motorhome garage door!’” He picked up some Schweiss Doors literature and took it home with him. He also visited a local airport where a friend owned a big Schweiss airpark hangar door to see a bifold liftstrap door first hand and get a general idea of how the Schweiss door operated. The gears started turning in his head and he was sure he could come up with a solution.
Korthuis was convinced he was going forward with his idea for a motorhome garage door and made an appointment with architect Mark Ouellette of Ouellette Residential Design in Lynden Wash., and told him what he wanted to do. He shared the Schweiss Doors folders from the fair and they discussed several ways to do it to conform to the zoning restrictions. Ouellette was familiar with Schweiss Doors, having specified them for airplane hangars and agricultural building projects.
Ouellette and Korthuis eventually came up with a sketch of what they wanted to do. The building inspector looked at the sketch and said because the door blends into the rest of the architecture of the home and conforms to the look of the neighborhood there would be no problem with it as far as he could see.
Ouellette’s first idea was to use a downward ramp that went halfway into the ground using a conventional garage door. Then recalling photos and things he had seen from Schweiss Doors literature he and Korthuis devised a brilliant alternative to make the top half portion of the garage door above the windows exactly match the siding of the Korthuis home.
At one point Korthuis and Ouellette juggled an idea back and forth whether to use a Schweiss one-piece hydraulic door, but eventually decided to go with a Schweiss bifold liftstrap door 12 feet wide, with a 14-foot tall clear opening, making the total height of the door 16 feet. Korthuis decided to fasten a regular garage door without the tracks to the lower portion of the Schweiss Door frame; masonite siding would go above that. With the added weight of the exterior cladding he asked Schweiss Doors to supply a heavy-duty bottom-drive motor. It needed only two liftstraps to raise the additional weight. Autolatches, a remote opener and insulation put the finishing touches on the door.
The contractor, John Schuten, and his brother who worked in a metal shop, fastened a metal garage door with windows to the Schweiss Door frame. After some fine-tuning they finished the job. So what appears from the outside to be an 8 foot tall door is really a 16 foot door.
“I’ve always liked the Schweiss doors, but the Korthuis door is crazy cool and the vertical seam on the horizontal siding has a very tight tolerance,” Ouellette says. “John Schuten did a bang up job cutting it on a bevel so the seam is virtually invisible. It locks up like a vault. Even when you stand right next to it you can barely see it. The finished product is better than I ever imagined. I’m still amazed when I look at this Schweiss door.”
Korthuis says that everyone who sees his Schweiss garage door is amazed. Some of his acquaintances have indicated they are going to do the same when they build their homes.
Schweiss Doors is the premier manufacturer of hydraulic and bi-fold liftstrap doors. Doors are custom made to any size for any type of new or existing building for architects and builders determined to do amazing things with their buildings, including the doors. For more information, visit www.bifold.com.
Cutline:
Two patented Schweiss liftstraps and a heavy-duty bottom-drive motor easily lift the 16 foot RV Schweiss bifold garage door. Herb Korthuis of Lynden, Wash., needed to find a way to be able to garage his motorhome, but a local zoning ordinance prevented him from building a garage with a door higher than 8 feet. It was Schweiss to the rescue with a 16 x 12 foot bifold liftstrap door, which when in the closed position gives the visual of an 8 foot door. Korthuis had a contractor attach a conventional garage door front with windows to the bottom half of the Schweiss doorframe and finished off the top with siding that exactly matched his new home. In the closed position you can just barely see the seams on the door sides. It alleviated the building inspector’s concerns.
Images (from left): Korthius_Garage1.jpg; Korthius_Garage2.jpg; Korthius_Garage3.jpg; Korthius_Garage4.jpg; Korthius_Garage5.jpg; Korthius_Garage6.jpg; Korthius_Garage7.jpg; Korthius_Garage8.jpg; Korthius_Garage9.jpg; Korthius_Garage10.jpg (Photo Caption available at end of article.)
To download immediately, right-click on the picture and choose "Save Target As..." or "Save Image As..." In most browsers you can also left-click to view the full-size image and then right-click on the larger picture and click "Save Picture As..." or "Save Image As..."
